A coordinated 11kV overhead distribution supply package covering poles, conductors, insulators, line fittings, protection, transformers, earthing and project delivery materials.
A typical 11kV project needs poles and crossarms, phase conductors or ABC, pin/post/strain insulators, suspension and dead-end fittings, connectors, fuse cutouts, surge arresters, switching equipment, distribution transformers, earthing materials and project-coded packing. Final quantities and ratings follow the approved pole schedule, single-line diagram and utility specification.
The following values organize the first technical review. They do not replace the utility specification.
Every group is checked against the same structures, conductors, insulation, equipment interfaces and approved project codes.
The physical line and its conductor support system.
Assemblies matched to conductor, structure and load.
Pole-mounted equipment and site-ready material control.
Match conductor diameter and rated tensile strength to clamps, dead ends, joints and dampers.
Match insulator creepage, mechanical class and pole-top geometry to the environment and utility drawing.
Confirm transformer ratio, vector group, impedance and accessories separately from the line-material list.
Separate tangent, angle, dead-end, terminal and transformer structures before calculating kits.
Unknown fields may be marked “to be confirmed,” but they should remain visible in the clarification list.
Yes. KOVYEL can normalize item names, separate structure kits and issue a technical clarification list. Final ratings and quantities still require approved project information.
Yes when the approved design uses both systems, but clamps, connectors, insulation and terminations must be separated by conductor construction and size.
They can be included in the coordinated supply package when drawings, ratings, quantities and destination requirements are provided.